Product Brief Description:
Application:
1) This toilet tissue wrapping Machine end-sealing and film-moving action are controlled by servo motor which guarantee the quick speed and accuracy;
2) Toilet roll wrapping machine adopts high speed PLC, HMI, Servo motor, Temperature module to complete the running control system. And the machine program will speed changes according to the front feeding situation automatically.
3) Super big HMI and parameter set and easy to change different size. Some main area has the calculate, such as the film location;
4) End-seal is controlled by a separate module, which guarantee a best seal. And you can choose hot seal or not seal as your like;
Product Details Description:
WD-TP-PM1-520A Toilet Paper Wrapper for single roll
This Toilet Paper Wrapper has following features:
1) The cutter will reset after cutting the material;
2) Special film supporting structure to make the film changing easy;
3) Easy to change the former to suit 90mm-120mm diameter paper；
4) Mid-seal adopts the transient heating type and when machine stops, it does not damage the film which guarantee the product percent of pass;
5) In the letter before two on unheated rubber film feeding wheel and tighten packing film device, to press paper ball for conveying products, which can also adjusted by hand to suit different size;
6) Machine main conveying system adopts the synchronous belt system;
7) Film print area location is controlled by sensor. And it can change the location in the HMI
Technical Parameters for WD-TP-PM1-520A Toilet Paper Wrapper for single roll
| Model |
WD-TP-PM1-520A |
| Diameter |
90-120(mm) |
| Length |
90-220(mm) |
| Max film dia |
φ400 mm |
| Max film width |
420mm |
| Film thickness |
0.018mm—0.03mm； |
| Film material |
SPP |
| Packing speed |
120-180 pieces/min（code distance≤270mm） |
| Motor power |
1.5 Kw(film moving motor) 1Kw(end-seal motor) 1Kw(pusher motor) 0.75 Kw +0.75 Kw (tidy and pushing motor) |
| Main machine heating power |
5Kw |
| Side-ironing heating power |
3.6 Kw |
| General power |
14.5 Kw |
| Capacity |
97% |
| Print bias |
≤3mm |
| Machine running power |
≥80% |
| Machine weight |
2200(kg) |
| Outer dimension |
(L)4330mm*(W)3450mm*(H)1700(mm) |
| Power supply |
3 phase 4 line 380V 50HZ，control voltage DC24V。 |
| Compress air consumption |
6kg/cm2 0.25m3/min |
| Machine noise |
≤75（db） |
EN
